Before installing the basketball rack, remove all the packaging according to the details of the main components of the basketball rack.
1. Place the basketball rack box on the center line of the court 1 meter away from the outside of the court end line, using 8 M18 × The lower end of the column assembly is connected to the base with a hexagon bolt, spring washer, and enlarged flat washer of 40.
2. Tilt the column and base forward at a certain angle, place the extension arm on the upper end of the column, and connect the vertical arm and the extension arm with a tile joint.
3. After connecting the rear pull rod and the connecting pipe with an adjusting bolt, the upper end is connected to the shaft at the rear end of the arm extension with a tile joint; Connect the other end of the rear pull rod to the box ear with an M12x60 screw.
4. Connect the basketball rack backboard ears to the backboard with M10x20 countersunk bolts, and then the two people will lift the backboard. First, use M12 × 70 bolts, spring pads, and flat pads connect the basket, backboard, and extension arm, and then use the backboard adjustment bolts to connect and fasten the upper pull rod (Figure 3) to the backboard ear; After that, place the connected end of the upper pull rod under the fixed pressing plate and screw on M10 × 30 Hex head bolt.
5. Erect the basketball rack, open the base cover plate, place the counterweight (or stone) into the base, and then cover the cover plate. Tighten all bolts and nuts of the basketball rack. The installation of the basketball rack is complete.
6. Place the basketball frame protective sleeve on the base and column, and assemble the buckle firmly.